# Configuration Local preference **URL:** \ **Category:** Uncategorized\ **Tags:** ripe-database\ **Created:** [9 May 2023 13:19 UTC](https://forum.ripe.net/t/configuration-local-preference/460 "2023-05-09T13:19:07Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![Baptiste](https://avatars.discourse-cdn.com/v4/letter/b/cab0a1/32.png) [@Baptiste](https://forum.ripe.net/u/Baptiste)\ **Post date:** [9 May 2023 13:19 UTC](https://forum.ripe.net/t/configuration-local-preference/460/1 "2023-05-09T13:19:07Z")
Hello, I want to set up locals preferences on my infra, I want to set up locals preferences on my infra. I have made this configuration: Building configuration… Current configuration : 3234 bytes ! ! Last configuration change at 12:30:59 UTC Tue May 9 2023 ! NVRAM config last updated at 08:59:06 UTC Tue May 9 2023 ! version 15.6 service timestamps debug datetime msec service timestamps log datetime msec no service password-recovery ! hostname C1\_B ! boot-start-marker boot-end-marker ! ! ! no aaa new-model ip cef ! ! ! ! no ipv6 cef ! ! ! ! ! ! ! multilink bundle-name authenticated l3-over-l2 flush buffers asr901-storm-control-bpdu 1000 ! ! ! spanning-tree mode pvst spanning-tree extend system-id license udi pid A901-4C-F-D sn CAT2407U07L bridge-domain 20 ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface GigabitEthernet0/0 no ip address negotiation auto service instance 20 ethernet encapsulation untagged bridge-domain 20 ! ! interface GigabitEthernet0/1 no ip address negotiation auto ! interface GigabitEthernet0/2 no ip address negotiation auto service instance 10 ethernet encapsulation untagged bridge-domain 10 ! ! interface GigabitEthernet0/3 no ip address negotiation auto service instance 30 ethernet encapsulation untagged bridge-domain 30 ! ! interface GigabitEthernet0/4 no ip address media-type auto-select negotiation auto ! interface GigabitEthernet0/5 no ip address media-type auto-select negotiation auto ! interface GigabitEthernet0/6 no ip address media-type auto-select negotiation auto ! interface GigabitEthernet0/7 no ip address media-type auto-select negotiation auto ! interface GigabitEthernet0/8 no ip address negotiation auto qos-config scheduling-mode min-bw-guarantee ! interface GigabitEthernet0/9 no ip address negotiation auto qos-config scheduling-mode min-bw-guarantee ! interface GigabitEthernet0/10 no ip address negotiation auto qos-config scheduling-mode min-bw-guarantee ! interface GigabitEthernet0/11 no ip address negotiation auto qos-config scheduling-mode min-bw-guarantee ! interface FastEthernet0/0 no ip address shutdown ! interface Vlan1 no ip address shutdown ! interface Vlan10 description _ **int gi0/2** _ ip address 192.168.1.2 255.255.255.0 ip ospf 1 area 0 ! interface Vlan20 description _ **int gi0/0** _ ip address 192.168.25.1 255.255.255.0 ! interface Vlan30 description _ **int gi0/3** _ ip address 192.168.102.118 255.255.255.0 ! router ospf 1 router-id 3.3.3.3 network 192.168.1.0 0.0.0.255 area 0 ! router bgp 65001 bgp log-neighbor-changes bgp rpki server tcp 192.168.102.39 port 3323 refresh 600 neighbor 192.168.1.1 remote-as 65001 neighbor 192.168.25.2 remote-as 65002 neighbor 192.168.102.39 remote-as 65001 ! address-family ipv4 network 192.168.1.0 network 192.168.5.0 network 192.168.25.0 neighbor 192.168.1.1 activate neighbor 192.168.25.2 activate neighbor 192.168.102.39 activate neighbor 192.168.102.39 route-map rpki in exit-address-family ! ip forward-protocol nd ! ! no ip http server no ip http secure-server ! ! route-map rtmp-rpki permit 10 match rpki invalid set local-preference 50 ! route-map rtmp-rpki permit 20 match rpki not-found set local-preference 100 ! route-map rtmp-rpki permit 30 match rpki valid set local-preference 200 ! ! ! control-plane ! environment monitor ! line con 0 line vty 0 4 login ! exception crashinfo buffersize 128 ! ! end BGP table version is 11, local router ID is 192.168.102.118 Status codes: s suppressed, d damped, h history, \* valid, \> best, i - internal, r RIB-failure, S Stale, m multipath, b backup-path, f RT-Filter, x best-external, a additional-path, c RIB-compressed, Origin codes: i - IGP, e - EGP, ? - incomplete RPKI validation codes: V valid, I invalid, N Not found ``` Network Next Hop Metric LocPrf Weight Path ``` V\* i 192.168.1.0 192.168.1.1 0 100 0 i V\*\> 0.0.0.0 0 32768 i N\*\> 192.168.2.0 192.168.25.2 0 0 65002 i N\* 192.168.25.0 192.168.25.2 0 0 65002 i V\*\> 0.0.0.0 0 32768 i What is missing in my configuration for the local pref to be displayed in sh ip bgp? Best regards ---
**Author:** ![mpels](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.ripe.net/mpels/32/601_2.png) [@mpels](https://forum.ripe.net/u/mpels)\ **Post date:** [9 May 2023 17:52 UTC](https://forum.ripe.net/t/configuration-local-preference/460/2 "2023-05-09T17:52:46Z")
In the BGP neighbor configuration for 192.168.102.39 you are referencing route-map _rpki_, while the name of your route-map is _rtmp-rpki_. ---
**Author:** ![Baptiste](https://avatars.discourse-cdn.com/v4/letter/b/cab0a1/32.png) [@Baptiste](https://forum.ripe.net/u/Baptiste)\ **Post date:** [10 May 2023 06:15 UTC](https://forum.ripe.net/t/configuration-local-preference/460/3 "2023-05-10T06:15:19Z")
ok thanks for the mistake. The route map I have to activate it on the link between the rpki servers and the router or in the eBGP connection for the local preference to appear? ---
**Author:** ![mpels](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.ripe.net/mpels/32/601_2.png) [@mpels](https://forum.ripe.net/u/mpels)\ **Post date:** [12 May 2023 13:17 UTC](https://forum.ripe.net/t/configuration-local-preference/460/4 "2023-05-12T13:17:07Z")
The “bgp rpki server” configuration is enough for your router to receive RPKI information from your validator software. You do not need to set up a BGP session between your router and the server running the validator. Route maps can be used on eBGP peering sessions to influence the BGP decision process (for example changing local preference), based on the RPKI information. Note that in production environments it is recommended to drop RPKI invalid announcements, not lower their local preference. See [https://labs.ripe.net/documents/64/BGP\_RPKI\_Tofoni\_Luciani\_20200319.pdf](https://labs.ripe.net/documents/64/BGP_RPKI_Tofoni_Luciani_20200319.pdf) for more details about the RPKI architecture and specific examples for Cisco routers.